Product5 - Bulk Cloned-manufacture,factory,supplier from China

Medium density fiberboard is a kind of man-made board made of wood or plant fiber through mechanical separation and chemical treatment, mixed with adhesive and waterproof agent, and then formed by high temperature and high pressure.

 Advantages of FR MDF/Fire Resistant MDF 1.Excellent flame retardant performance: Comply with the B1 regulations of GB8624-2012 "Classification of Combustion behavior of Building Materials and Products".2.Excellent environmental protection performance: the amount of formaldehyde released reaches the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

What are the advantages of decorative board MDF?    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Due to its softness, impact resistance and easy reprocessing, MDF is a good material for making furniture abroad. Density board is easy to finishing.

What are the advantages and disadvantages of commonly used density boards in the production of showcases?Advantages of MDF1. Because the density board is hard, it is not easy to deform. At the same time, it is not easy to warp because it is made of fine wood chips. At the same time, the MDF for display cabinets has high bending resistance and impact resistance.2.

Particle Board Quality Particle board is also called particle board or particle board. it's miles a form of timber-based panel product of timber or different lignocellulosic substances and stuck under warmness and stress after making use of adhesive. it's also known as chipboard.

The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000.    After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.   After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

Particle board is also called chip board or flake board. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

 Particle Board Classifications:According to the use: Class A particle board; Type B particle boardAccording to the structure of particleboard, it can be divided into: single-layer particleboard; Three layer particle board; Graded structure particle board; Oriented strand board; Waffle particle board; Moulded particleboard.According to the manufacturing method, it can be divided into: flat pressed particle board; Extrude particle board.

     Particleboard is also called particle board or particle board. It is a kind of wood-based panel made of wood or other lignocellulosic materials and glued under heat and pressure after applying adhesive. It is also called particle board.

Particle Board Classification:According to the use: Class A particle board; Type B particle boardAccording to the structure of particleboard, it can be divided into: single-layer particleboard; Three layer particle board; Graded structure particle board; Oriented strand board; Waffle particle board; Moulded particleboard.According to the manufacturing method, it can be divided into: flat pressed particle board; Extrude particle board.

Raw material of Particle board.1.Particleboard is made on the basis of scrap materials, but the range of scrap materials is relatively wide. According to different types of scrap materials, particleboard can be divided into wood particleboard, bagasse particleboard, flax chipboard, cotton stalk particleboard, Bamboo particle board, etc., cement particle board, gypsum particle board. It can be seen that most of the scraps contain wood cellulose.

What is particle board?  Particle board is also called chipboard or flakeboard. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

Particle Board characteristics Because particleboard has a relatively uniform structure and good processing performance, it can be processed into large-format boards according to needs, and is a good raw material for making furniture of different specifications and styles. The finished particleboard does not need to be dried again and can be used directly.

Decoration Particle Board Introduction:Particle board is made of wood or other lignocellulosic materials, applied adhesive and then glued together under the action of heat and pressure, also known as shredded board. It is mainly used in furniture manufacturing, construction industry and train and carriage manufacturing.Decoration Particle Board Advantages:A. Good sound absorption, sound insulation and thermal insulation properties;B. The internal granular crossed and staggered structure, the performance of each direction is basically the same, and the lateral bearing capacity is good;C.

Which is better, particleboard or density boardThe physical properties of density board and particle board are different, and there are not small differences in many aspects. When we evaluate building materials, it is difficult to determine which one is strong and which is weak. Most of the time, we need to decide which building materials to choose according to the occasion and space used. Of course, from the perspective of interior space, density board is obviously better than particle board. Why is this?The nature of the whole MDF board is the same, and its plasticity is very good.

      Our most important products comprise: Particle board and fiber board with many advanced imported equipments and production strains, definitely presenting potential now not less than 30000 cubic meters monthly, usually a good deal interest to great manipulate and take a look at laboratory facet.     all production nicely adapt to north the united states, india, middle east, south asia, europe, middle & south the usa, many countries and regions, nicely used and in shape for furniture, decorations and construction industries.     we always in

Particle Board Advantages1) tight creation and high strength2) minimum twisting, delamination or warping3) no rotten or decay, sturdy in opposition to corrosion and fireplace4) water evidence, steady while exposed within the herbal or moist surroundings5) low formaldehyde emission6) ideal nailing strength, clean to be sawn, nailed, drilled, grooved, planed, filed or polished7) precise warm temperature and sound resistant, clean to be covered8) presenting manufacturing record9) supplying check record10) competitive cargo11) aggressive after-sales serviceParticle board detailsSize1220*2440mmThic

    The production methods of particleboard are divided into the flat pressing method of intermittent production, the extrusion method of continuous production and the rolling method according to the different slab forming and hot pressing process equipment.     In actual production, the flat pressing method is mainly used.

What is FR MDF?    Fire-resistant and flame-retardant panels (FR MDF) are made by adding flame retardants and adhesives to wood fibers through continuous hot pressing. They are mostly used in public places that must meet strict fire regulations, as well as building interior decoration, production of flame-retardant furniture and flame-retardant floors, and wooden fire doors. Production, ship and vehicle interior decoration, etc.

What details should be paid attention to when density board is veneered?        1. Moderate pressure: generally 2~3MPa, if it is too low, it will affect the bonding strength between the base material and impregnated paper, and if it is too high, it will damage the board.        2. Hot pressing time: it depends on the curing speed of the impregnated resin and the hot pressing temperature, generally 40-50s is appropriate. If the time is too long, the resin will be over-cured, lose its proper elasticity, and cause cracks in the subsequent processing.

Variety of Wood Panel1. Low density fiberboard It is a panel made of wood or plant fiber shavings that are applied with a large amount of urea-formaldehyde glue and auxiliary materials. Its density is lower than 450 kg/m3, the fiber particles are larger, the internal structure is not uniform, the strength is relatively insufficient, and the weight is light.2. Medium density fiberboardIt is a board made of wood fiber or other plant fiber, added with urea-formaldehyde adhesive, and pressed under high temperature and high pressure.

   Particle board, also known as chipboard, is a wood-based board made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive, also known as flake board. It is mainly used in furniture manufacturing and construction industry as well as train and car carriage manufacturing.  Xinhua Wood Company Show  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan.